NABL Test Report for Cica & Ceramide Oil-Free Moisturizer
Cica & Ceramide Oil-Free Moisturizer: NABL Lab Test Report
NABL lab test report for Cica & Ceramide Oil-Free Moisturizer: pathogens absent and pH 6.32. Batch C23K043.
Safety Summary: Cica & Ceramide Oil-Free Moisturizer
Is Cica & Ceramide Oil-Free Moisturizer safe? Yes. It was independently tested at Sigma Test & Research Centre, a laboratory accredited by NABL (Accreditation No. TC-5369). The tested sample, from batch C23K043, was analysed against the limits in the referenced standards.
Free from harmful bacteria and fungi. Four organisms were tested: Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans. All were reported Absent. Total microbial count was Less than 10 cfu/gm (limit 1000 cfu/gm); Total yeast & mould count was Less than 10 cfu/gm (limit 100 cfu/gm).
Gentle, skin-friendly pH. The measured pH is 6.32, which is mildly acidic.
Sulphate-free and paraben-free. The published ingredient list contains no sulphates, parabens or mineral oil. Preservation uses phenoxyethanol, ethylhexylglycerin and sodium benzoate.
Is it chemical free? No cosmetic is chemical-free - water itself is a chemical. This one is free from sulphates, parabens and mineral oil.
What these results cover. The laboratory findings apply to the tested sample from batch C23K043 and the parameters listed on this page. Skin tolerance is assessed separately, in the dermatological patch test certificate. NABL accredits laboratories, not products.
Key Findings at a Glance
Results of Analysis
Result is the measured outcome for this batch. Requirement / Limit is the specification where the standard defines one; a dash means it defines none. Test Method is the standard the laboratory followed.
| Parameter | Result | Requirement / Limit | Test Method |
|---|---|---|---|
| Physical & Organoleptic | |||
| Appearance | White soft mass | - | STRC/STP/F256 |
| Colour | White | - | STRC/STP/F256 |
| Chemical Parameters | |||
| pH | 6.32 | - | IS:6608:2004 |
| Total residue, % w/w | 17.36 | - | IS:6608:2004 |
| Thermal stability (45±1C) for 48 hours | Passes the test | - | IS:6608:2004 |
| Total fatty matter, % w/w | 14.35 | - | IS:6608:2004 |
| Microbial Counts | |||
| Total microbial count, cfu/gm | Less than 10 | NMT 1000 | IS:14648:2011 |
| Total yeast & mould count, cfu/gm | Less than 10 | NMT 100 | IS:14648:2011 |
| Pathogens | |||
| Escherichia coli, per gm | Absent | Shall be absent | IS:14648:2011 |
| Pseudomonas aeruginosa, per gm | Absent | Shall be absent | IS:14648:2011 |
| Staphylococcus aureus, per gm | Absent | Shall be absent | IS:14648:2011 |
| Candida albicans, per gm | Absent | Shall be absent | IS:14648:2011 |
Understanding These Tests for Cica & Ceramide Oil-Free Moisturizer
Physical & Organoleptic
On the tested sample, Cica & Ceramide Oil-Free Moisturizer was recorded as a white soft mass and white in colour.
These checks record what the laboratory observed in the sample as received.
Chemical Parameters
It also lists pH 6.32, total residue 17.36 % w/w, thermal stability for 48 hours Passes the test and total fatty matter 14.35 % w/w, for which the standard sets no specification.
Chemical parameters are measured against the standard's specification where one exists.
Microbial Counts
Cica & Ceramide Oil-Free Moisturizer recorded total microbial count Less than 10 cfu/gm against a limit of NMT 1000 cfu/gm and total yeast & mould count Less than 10 cfu/gm against a limit of NMT 100 cfu/gm.
These tests count viable microorganisms against the limits set by the standard.
Pathogens
In the tested sample of Cica & Ceramide Oil-Free Moisturizer, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans were reported Absent - not detected in the tested quantity.
Pathogen tests cover only the organisms listed, not all microorganisms.
Test Overview
| Report Title | Chemical and Microbiological Analysis - Cica & Ceramide Oil-Free Moisturizer |
| Parameters Measured | physical and organoleptic properties, chemical parameters, microbial counts and pathogens |
| Test Type | Laboratory chemical and microbiological analysis of a product sample |
| Test Methods | IS:6608:2004; IS:14648:2011 |
| Sample Tested | C23K043 (50 g x 6) |
About Cica & Ceramide Oil-Free Moisturizer
Introducing Dermat’s lightweight moisture fix for sensitive skin: Dr. Sheth's Cica & Ceramide Oil-Free Moisturizer is a light & non-greasy formula with the best-in-class hydrating dream team of Ceramide Com
Claims and Their Evidence
Lab-sourced rows are measured results. Product-page rows are the brand's own claims, shown with the brand's qualifier. The laboratory report is not evidence for cosmetic-benefit claims.
| Statement | Evidence / basis | Source |
|---|---|---|
| Within microbiological limits | Counts within the standard limits; specified pathogens reported Absent. | Lab report 13019388/B |
| Sulphate-free cleansing base | No SLS or SLES in the published ingredient list. | Product ingredient list |
| Paraben-free | No parabens in the published ingredient list. | Product ingredient list |
Report Details
| Testing Laboratory | Sigma Test & Research Centre (NABL-accredited, Accreditation No. TC-5369) |
| ULR Number | TC536923000012892F |
| Report No. | 13019388/A, 13019388/B |
| Report Issue Date | 04/12/2023 |
| Testing Period | 25/11/2023 to 02/12/2023 |
| Batch Tested | C23K043 (Mfg. 10/2023; 10/2025) |
| Standards Referenced | IS:6608:2004; IS:14648:2011 |
| Authorised Signatory | Vinit Sharma, Person Incharge, Sigma Test & Research Centre |
What This Report Shows
What the results demonstrate
- Physical characteristics of the tested sample were recorded as observed by the laboratory.
- The tested sample met the microbiological count limits of the referenced standard.
- The specified pathogenic microorganisms were reported Absent in the tested sample.
- Testing was performed by an NABL-accredited laboratory.
What the results do not demonstrate
- They do not certify the product; NABL accredits laboratories, not products.
- They do not establish overall safety or suitability for every individual.
- They do not prove any cosmetic-benefit or performance claim; those are addressed separately and on the product page.
- They do not cover parameters or organisms outside those listed.
- They apply to the tested sample from the stated batch, not necessarily to other batches.
Formulation at a Glance
From the ingredient list published on the product page. Not part of the laboratory report.
Active Ingredients
| Component | Role in the formulation |
|---|---|
| Niacinamide | Vitamin B3 derivative used for tone and barrier support. |
| Centella Asiatica Extract | Cica; botanical used in soothing and barrier formulas. |
| Tocopheryl Acetate (Vitamin E) | Stable vitamin E ester; antioxidant. |
| Laminaria Digitata Extract | Seaweed extract used in hydration-focused formulas. |
| Ceramide 1 | Skin-identical lipid used to support the moisture barrier. |
| Cholesterol | Barrier lipid used alongside ceramides. |
Moisturising and Emollient
| Component | Role in the formulation |
|---|---|
| Caprylic/Capric Triglyceride | Light coconut-derived emollient that spreads easily. |
| Glycerin | Humectant that draws water into the skin surface. |
| Propylene Glycol | Humectant and solvent. |
Conditioning Agents
| Component | Role in the formulation |
|---|---|
| Dimethicone | Silicone that smooths the surface and adds slip. |
Texture and Stability
| Component | Role in the formulation |
|---|---|
| Aqua (Water) | Solvent base of the formulation. |
| Lecithin | Phospholipid emulsifier of plant origin. |
| Disodium EDTA | Chelating agent that stabilises the formula against metal ions. |
Preservative System
| Component | Role in the formulation |
|---|---|
| Phenoxyethanol | Broad-spectrum preservative used at low levels. |
| Sodium Benzoate | Preservative effective in acidic formulations. |
| Imidazolidinyl Urea | Preservative used in emulsion systems. |
What the Formulation Leaves Out
| Excluded | Basis |
|---|---|
| No sulphates | Not present in the published ingredient list. |
| No parabens | Not present in the published ingredient list. |
| No mineral oil | Not present in the published ingredient list. |
Published Research on Key Actives
Published literature on each ingredient, not studies on this product.
| Ingredient | Published finding | Relevance to the formulation |
|---|---|---|
| Niacinamide | Topical niacinamide has been reported to improve the appearance of ageing facial skin, including tone and texture (Bissett DL, et al. Dermatol Surg. 2005;31(7 Pt 2):860-865). | Supports the inclusion of niacinamide in tone and barrier formulas. |
| Ceramides | Ceramides are essential lipids of the stratum corneum and topical ceramides support barrier repair (Coderch L, et al. Am J Clin Dermatol. 2003;4(2):107-129). | Supports ceramides as barrier-support lipids. |
| Vitamin E | Vitamin E is reviewed as a major lipid-soluble antioxidant in skin, with photoprotective and moisturising roles (Keen MA, Hassan I. Indian Dermatol Online J. 2016;7(4):311-315). | Supports vitamin E as an antioxidant and emollient stabiliser. |
| Centella Asiatica (Cica) | Centella asiatica has documented wound-healing and soothing activity in dermatological use (Bylka W, et al. Postepy Dermatol Alergol. 2013;30(1):46-49). | Supports centella asiatica as a soothing botanical. |
Dermatological Patch Test Certificate
This NABL lab test report covers the chemical and microbiological analysis of Cica & Ceramide Oil-Free Moisturizer. Skin tolerance is a separate question, assessed through dermatological patch testing. The dermatological patch test certificate for this product is published on its own page, so you can review the laboratory analysis here and the patch-test findings there as one trust cluster.
View the Original Lab Report
The complete original report for Cica & Ceramide Oil-Free Moisturizer is available as issued by the laboratory. It carries the laboratory letterhead, the ULR number, and the authorised signatory's details.
The Tested Product
Cica & Ceramide Oil-Free Moisturizer
The results on this page come from laboratory testing of a sample from batch C23K043. See the complete ingredient list, current offers and reviews on the product page.
View ProductFrequently Asked Questions
A: For the tested batch, microbial counts were reported within the limits of the referenced standard and the specified pathogens were reported Absent. These results indicate the tested sample met the referenced microbiological limits; they do not establish overall product safety.
A: The measured pH in this report is 6.32.
A: The published ingredient list for this product contains no sulphates, parabens or mineral oil. This is based on the ingredient list, not on the laboratory report, which covers contaminants and microbiological quality.
A: No. The report covers chemical and microbiological parameters on a sample from the stated batch. Performance and cosmetic-benefit claims are made by the brand on the product page and are not part of this laboratory report.
A: A ULR (Unique Lab Report) number is a one-of-a-kind identifier that NABL-accredited laboratories print on every test report, making it traceable. The ULR for this report is TC536923000012892F. The original report PDF linked on this page carries the laboratory letterhead and authorised signatory details.
A: No. NABL accredits laboratories, not products. This page reports the results of testing performed at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-5369) on a sample of this product. It does not represent a product certification by NABL.
A: The report covers batch C23K043 (manufactured 10/2023). The laboratory report states the tested sample as 50 g x 6. Results refer only to the tested sample and the parameters listed.
References
- IS:6608:2004. Bureau of Indian Standards.
- IS:14648:2011. Bureau of Indian Standards.
- Sigma Test & Research Centre. Test reports 13019388/A, 13019388/B.
